What is the smallest measurable distance technically

Photoelectric sensor with one-button calibration and separate amplifier

model

PS-T1

PS-T1P

PS-T2

PS-T2P

Type

Main unit

1-wire connection

Output radiation

NPN output

PNP output

NPN output

PNP output

response time

500 µs

Operating mode

LIGHT ON / DARK ON (selector switch)

Signal lamp

Output display: red LED, stable operation display: green LED, calibration display: yellow LED

Timer function

40 ms switch-off delay, 40 ms switch-on delay, timer OFF (selector switch)

External calibration input signal

Voltage-free input (contact, solid state)

Control signal output

NPN: max. 100 mA (max. 40 V), residual voltage max. 1 V.

PNP: max. 100 mA (max. 30 V), residual voltage max. 1 V.

NPN: max. 100 mA (max. 40 V), residual voltage max. 1 V.

PNP: max. 100 mA (max. 30 V), residual voltage max. 1 V.

Stability output

NPN: max. 50 mA (max. 40 V), residual voltage max. 1 V. *1

PNP: max. 50 mA (max. 30 V), residual voltage max. 1 V. *1

NPN: max. 50 mA (max. 40 V), residual voltage max. 1 V. *3

PNP: max. 50 mA (max. 30 V), residual voltage max. 1 V. *3

Protection circuit

Reverse polarity protection, overcurrent protection, wave eater

Expansion units

Up to 16 expansion units can be connected to a single main unit (17 units in total)

Face values

Supply voltage

12 to 24 VDC ± 10%, ripple (S-S) 10% or less

Power consumption

35 mA or less

Environmental resistance

Ambient temperature

-10 to +55 ° C (no freezing)*2

Relative humidity

35 to 85% RH (no condensation)

Vibration resistance

10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y and Z directions

Shock resistance

500 m / s2, 3 times each in the X, Y and Z directions

Housing material

Housing / cover: polycarbonate

Weight

Approx. 75 g (including 2m cable)

Approx. 40 g (including 2m cable)

*1 The stability output is only available on the PS-T1 (P). The stability output for the PS-T2 (P) / T0 takes place via the PS-T1, FS-T1, FS-M1 or FS-R0.
*2 If several units are connected, the ambient temperature depends on the number of units connected.
For 3 to 10 units: -10 to +50 ° C
For 11 to 16 units: -10 to +45 ° C
When connecting multiple units, make sure that they are mounted on a metal DIN rail. Make sure that the output current does not exceed 20 mA.
*3 The power supply for the PS-T2 (P) / T0 is provided by the PS-T1, FS-T1, FS-M1 or FS-R0.